Wen WA0392 - User Manual

INSTRUCTION MANUAL
SPECIFICATIONS
MODEL WA0392
FOOT PEDAL SWITCH
ELECTRIC
CONNECTION DIAGRAM
Model WA0392
Rating 250V AC, 10A
Protection Rating IP54
Cord Length 6 Feet
N L
SW
W
G
WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this
commitment and our dedication to qualit
y.
LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE
GRE
AT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN
consumer
power tools will be free from defects in material or workmanship during personal use for a period of two (2) years
used
for professional or commercial use. Purchaser has 30 days from the date of purchase to report missing
or
damaged parts.
SELLER’S
SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent per-
mitted
by law, any warranty or condition implied by law, shall be the replacement of parts, without charge, which a
re
defective
in material or workmanship and which have not been subjected to misuse, alteration, careless
handling,
misrepai
r, abuse, neglect, normal wear and tear,
improper maintenance, or other conditions adversely affecting the
Product
or the component of the Product, whether by accident or intentionally, by persons other than Seller. T
o
make
a claim under this Limited Warranty, you must make sure to keep a copy of your proof of purchase that
clearly
-
dor
of Great Lakes Technologies, LLC. Purchasing through third party vendors, including but not limited to
garage
sales,
pawn shops, resale shops, or any other secondhand merchant, voids the warranty included with this
product.
Contact techsupport@wenproducts.com or 1-800-232-1195 with the following information to make arrangements:
your
shipping address, phone number, serial number, required part numbers, and proof of purchase. Damaged
or
defective parts and products may need to be sent to WEN before the replacements can be shipped out.
-
turning
a product for warranty service, the shipping charges must be prepaid by the purchaser. The product
must
be
shipped in its original container (or an equivalent), properly packed to withstand the hazards of shipment. T
he
product
must be fully insured with a copy of the proof of purchase enclosed. There must also be a description of
the
will be returned and shipped back to the pur
chaser at no charge for addresses within the contiguous United States.
THIS
LIMITED WARRANTY DOES NOT APPLY TO ITEMS THAT WEAR OUT FROM REGULAR USAGE OVER T
IME,
INCLUDING
BELTS, BRUSHES, BLADES, BATTERIES, ETC. ANY IMPLIED WARRANTIES SHALL BE LIMITED
IN
DUR
ATION TO TWO (2) YEARS FROM DATE OF PURCHASE. SOME STATES IN THE U.S. AND SOME
CANADIAN
PROVINCES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMI-
TAT
ION MAY NOT APPLY TO YOU.
IN
NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING
BUT
NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT
.
SOME ST
ATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITAT
ION
OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
THIS
LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS
WHICH
VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY
TO COUNT
RY.
THIS
LIMITED WARRANTY APPLIES ONLY TO ITEMS SOLD WITHIN THE UNITED STATES OF AMERICA, CANA-
DA
AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER
COUNTRIES,
CONT
ACT THE WEN CUSTOMER SUPPORT LINE. FOR WARRANTY PARTS OR PRODUCTS REPAIRED
UNDER
W
ARRANTY SHIPPING TO ADDRESSES OUTSIDE OF THE CONTIGUOUS UNITED STATES, ADDITIONAL
SHIPPING
CHARGES MA
Y APPLY.
WARRANTY STATEMENT
V. 2020.01.27
NOTE: Compatible with 120V / 240V items.

Summary

Warranty Statement

Limited Warranty for Home Use

Details warranty terms for consumer power tools, covering defects in material or workmanship.

Instruction Manual

Specifications

Lists model, rating, protection rating, and cord length for the foot pedal switch.

Connection Diagram

Illustrates the wiring diagram for the foot pedal switch connection.

Electrical Information

Covers grounding instructions and extension cord guidelines for safe electrical use.

Electrical Safety Warnings

Highlights crucial safety precautions to prevent electric shock and accidents.

Operation

Guides users on how to properly connect and operate the foot pedal switch with their tools.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Warranty Information

The WEN WA0392 Electric Foot Pedal Switch is a device designed to provide convenient, hands-free operation for various power tools. It acts as an intermediary switch, allowing users to turn tools on and off by pressing a foot pedal, thereby freeing up their hands for other tasks. This can significantly enhance safety and efficiency, especially when working with tools that require both hands for precise control or material handling.

Function Description:

The primary function of the WEN WA0392 is to enable foot-activated control of power tools. Instead of using the tool's built-in switch, the user plugs their tool into the receptacle on the foot pedal's power cord. The foot pedal's power cord is then plugged into a grounded electrical outlet. Once the tool's own switch is set to the "ON" position (without the tool actually starting), the foot pedal takes over as the primary control. Pressing down on the foot pedal activates the tool, and releasing it turns the tool off. This mechanism is particularly useful for stationary tools like scroll saws, sanders, or grinders, where continuous or intermittent operation is needed without having to reach for a manual switch.

Important Technical Specifications:

• Model: WA0392
• Rating: 250V AC, 10A
• Protection Rating: IP54
• Cord Length: 6 Feet
• Compatibility: Compatible with 120V / 240V items.
• Maximum Current Rating: The device is explicitly warned not to be used with equipment rated for more than 10A. This is a critical safety specification to prevent overloading and potential damage to the switch or the connected tool.

Usage Features:

1. Hands-Free Operation: The most significant feature is the ability to operate power tools using a foot pedal, which keeps hands free for guiding workpieces or maintaining control of the tool.
2. Simple Connection: The setup involves plugging the tool into the foot pedal's receptacle and then plugging the foot pedal into a grounded outlet.
3. Tool's Own Switch Pre-Setting: Users must first switch their tool to the "ON" position. The foot pedal then acts as the interruptor, controlling the actual power flow to the tool.
4. Instant On/Off Control: Pressing the pedal turns the tool on, and releasing it turns the tool off, providing immediate control.
5. Durability: The IP54 protection rating indicates that the switch is protected from dust ingress sufficient to prevent it from interfering with the operation of the equipment and from water spray from any direction. This suggests a degree of robustness suitable for workshop environments.
6. Versatile Voltage Compatibility: The switch is compatible with both 120V and 240V items, making it suitable for a wide range of power tools.

Maintenance Features:

The manual provides general electrical safety and cord maintenance guidelines, which are crucial for the longevity and safe operation of the foot pedal switch itself, as well as any connected tools.

• Extension Cord Guidelines:
  • Gauge Selection: Users are advised to use an extension cord heavy enough to carry the current the product will draw. An undersized cord can lead to voltage drop, power loss, and overheating. A table is provided for selecting the correct gauge based on cord length and amperage (e.g., for 10A: 18 gauge for 25 ft, 16 gauge for 50 ft, 14 gauge for 100 ft, 12 gauge for 150 ft).
  • Inspection: Always examine extension cords for proper wiring and good condition before use. Damaged cords should be replaced or repaired by a qualified person.
  • Proper Handling: Avoid pulling on the cord to disconnect; always pull on the plug. Disconnect the extension cord from the receptacle before disconnecting it from the product. Protect cords from sharp objects, excessive heat, and damp/wet areas.
• Grounding Instructions:
  • The foot pedal switch is equipped with a three-pronged plug and requires a matching, properly installed, and grounded outlet.
  • Users are warned not to modify the plug and to ensure proper grounding to prevent electric shock.
  • If the grounding instructions are unclear, a licensed electrician should be consulted.
  • Only three-wire extension cords with three-pronged plugs and outlets should be used.
• Electrical Safety Warnings:
  • Plug Matching: Power tool plugs (and by extension, the foot pedal's plug) must match the outlet and should not be modified.
  • Avoid Contact with Grounded Surfaces: To reduce the risk of electric shock, avoid body contact with earthed or grounded surfaces.
  • Environmental Protection: Do not expose the foot pedal or connected power tools to rain or wet conditions. If operating outdoors, use an outdoor-rated extension cord. If operating in damp locations, use a Ground Fault Circuit Interrupter (GFCI) protected supply.
  • Cord Care: Do not abuse the foot pedal's cord (or any connected tool's cord) by using it for carrying, pulling, or unplugging. Keep cords away from heat, oil, sharp edges, or moving parts.

Warranty Information:

The WEN WA0392, like other WEN consumer power tools, is covered by a limited warranty.

• Home Use: Two (2) years from the date of purchase or 500 hours of use, whichever comes first, for defects in material or workmanship during personal use.
• Professional/Commercial Use: Ninety (90) days for all WEN products.
• Missing/Damaged Parts: Purchaser has 30 days from the date of purchase to report missing or damaged parts.
• Remedy: Seller's sole obligation is the replacement of parts without charge, provided the defect is not due to misuse, alteration, careless handling, misrepair, abuse, neglect, normal wear and tear, improper maintenance, or other adverse conditions.
• Claim Process: Requires proof of purchase (date and place of purchase from a direct vendor of Great Lakes Technologies, LLC). Purchases from third-party vendors void the warranty. Contact techsupport@wenproducts.com or 1-800-232-1195 with required information.
• Shipping for Warranty Service: Purchaser prepays shipping charges. Product must be shipped in its original container (or equivalent), properly packed, fully insured, with proof of purchase and a problem description. Repairs and return shipping within the contiguous United States are at no charge.
• Exclusions: The warranty does not apply to items that wear out from regular usage over time (e.g., belts, brushes, blades, batteries).
• Limitations: Implied warranties are limited to two years. Seller is not liable for incidental or consequential damages.
• Geographic Scope: Applies only to items sold within the United States of America, Canada, and the Commonwealth of Puerto Rico. Additional shipping charges may apply for warranty repairs shipped outside the contiguous United States.

In summary, the WEN WA0392 Electric Foot Pedal Switch is a practical accessory for power tool users seeking enhanced control, safety, and efficiency through hands-free operation, backed by clear technical specifications and a comprehensive warranty.

Wen WA0392 Specifications