WENATEX Wenaflex Premium M

Questions and Answers

P
Paul WalkerAug 7, 2025
What to do if WENATEX Wenaflex Premium M radio remote control does not work?
- E
  Emily JacksonAug 7, 2025
  If the WENATEX Indoor Furnishing radio remote control or drive system isn't working, first ensure the radio receiver is properly plugged in. Also, check the radio remote control itself: make sure the batteries are correctly inserted or try replacing them. If problems persist, the radio remote control might be defective and need replacement. Finally, verify that the radio frequency setting is correct by repeating the teach-in procedure.
B
Brian RiosAug 11, 2025
Why WENATEX Wenaflex Premium M Indoor Furnishing shows no voltage?
- H
  hrussellAug 12, 2025
  If your WENATEX Indoor Furnishing shows no voltage, it could be due to a few reasons. First, check the supply line to ensure control voltage is provided. Second, inspect the fuses in the electrical distributor and replace any that are defective. Lastly, examine the customer’s electrical socket for any defects; check and connect the plug and socket properly.
C
Carol BridgesAug 15, 2025
What to do if emergency lowering function cannot be performed on WENATEX Wenaflex Premium M?
- N
  nbradleyAug 16, 2025
  If the emergency lowering function on your WENATEX Indoor Furnishing isn't working, the monobloc batteries might be empty and need replacement. Alternatively, check to ensure there are no objects located beneath the bed insert, and clear the space if necessary.
C
clarkjamesAug 20, 2025
What to do if WENATEX Indoor Furnishing radio remote control doesn't work?
- B
  Bradley HarrisonAug 20, 2025
  If the radio remote control or drive system of your WENATEX Indoor Furnishing doesn't work, consider these potential causes and solutions: * Ensure the radio remote control is properly plugged in by checking and connecting the plug and socket. * Verify the drive system is plugged in. * Check that batteries are correctly inserted in the radio remote control. * Try exchanging the batteries in the radio remote control. * If the issue persists, exchange the radio remote control. * Also, ensure the correct radio frequency setting by repeating the teach-in procedure.
W
william45Aug 25, 2025
How to resolve no voltage issue in WENATEX Wenaflex Premium M?
- W
  whitethomasAug 25, 2025
  If there's no voltage in your WENATEX Indoor Furnishing, here are a few things to check: First, ensure that control voltage is provided by checking the supply line. Next, inspect the fuses in the electrical distributor for any defects and exchange them if necessary. Finally, check your electrical socket for any defects and ensure the plug and socket connections are properly connected.
E
Edward GarciaAug 29, 2025
What to do if WENATEX Wenaflex Premium M drive cannot be set in motion?
- D
  Derek RiveraAug 29, 2025
  If the drive of your WENATEX Indoor Furnishing suddenly cannot be set in motion, it could be due to a couple of reasons. The thermal circuit breaker on the motor transformer might be actuated due to overload; in this case, leave the drive system in an inoperative state for approximately 20 to 30 minutes. Alternatively, the capacitor for the mains cut-off may be drained. If so, press the green key (D) on the plug/mains cut-off.
S
sloanjamesSep 1, 2025
Why emergency lowering function cannot be performed in WENATEX Indoor Furnishing?
- W
  William McdonaldSep 1, 2025
  If the emergency lowering function cannot be performed on your WENATEX Indoor Furnishing, it could be due to the following reasons: * The monobloc battery may be empty, in which case you should exchange it. * Objects may be located beneath the bed base; if so, clear the space.

WENATEX Wenaflex Premium M Specifications

General

Brand	WENATEX
Model	Wenaflex Premium M
Category	Indoor Furnishing
Language	English

WENATEX Wenaflex Premium M - User Manual

Table of Contents

Questions and Answers

WENATEX Wenaflex Premium M Specifications