12
4. Pull out and fold in the Crank Handle located on the back side of the shell.
5. Move the Canopy Lock Knob to the “LOWER” position.
6. With the Canopy Tool, raise the Canopy Panel
slightly (A) to release it, then lower it (B) to the
Storage Position. There will be a slight “click”
sound as the Canopy Panel is released.
NOTE: One Canopy Panel is fully vertical,
it may have to be pushed back slightly
to release it and then pulled forward
gently to start the forward rotation.
Lowering the Shell (continued)
A
B
Shell could tip if a locked
Canopy Panel is pulled on.
!
CAUTION
Always allow the Canopy
Panel to lower under it’s own
weight.
!
CAUTION
PULL
HANDLE
OUT AND
FOLD IN
FOR STORAGE
RAISE
LOWER
Canopy
Lock Knob
Canopy
Tool
Canopy
Panel
To Next Page
Loading...
Need help?
General
