Wenzel HT 400 RC User Manual

Pantec Engineering AG phone: +423/377 13 33 Dokumentnummer: UM-22031
Industriering 21 fax: +423/377 13 34 Dokumentrevision: D
9491 Ruggell mail: info@pantec.com Sprache: EN
Principality of Liechtenstein internet: www.pantec.com Freigabedatum: 14.05.2008
User Manual
Control Panel:
HT 400 / HT 400 RC

Wenzel HT 400 RC Specifications

General

Brand	Wenzel
Model	HT 400 RC
Category	Control Panel
Language	English

Summary

Safety Regulations and Precautions

Emergency Stop Functionality and Testing

Details the weekly test procedure for the EMERGENCY STOP button and circuit interruption.

Safe Battery Handling and Storage

Guidelines for safe charging, disposal, and storage of the battery pack to prevent hazards.

Technical Overview of Control Panel

Control Panel Elements and User Interface

Emergency Stop Button Operation and Reset

How to operate the emergency stop and the procedure for resetting it.

Joystick Functionality in Different Modes

Active Key for Axis Control Activation

Servo Power On and Status

X, Y, Z Axis Activation and Braking

HT 400 RC Battery Status LED Interpretation

Essential Control Panel Operations

Powering On the HT 400 RC Unit

Step-by-step guide for turning on the HT 400 RC control panel.

Switching Between Operating Modes

Moving and Traversing Machine Axes

Detailed instructions for axis movement using the joystick.

Setting and Adjusting Traverse Speed

How to select and adjust rapid and crawl traverse speeds.

Enabling Servo Drive Power Supply

Procedure for switching on the power supply to the machine's servo drives.

Monitoring HT 400 RC Battery Charge

Recharging the HT 400 RC Battery Pack

Instructions and important notes for charging the battery.

Shutting Down the HT 400 RC Control Panel

Procedures for manual and automatic shutdown of the control panel.

Troubleshooting Guide for Control Panel

Common Faults, Causes, and Remedies

A table detailing common issues, their causes, and recommended remedies.

Pantec Customer Support Information