71
ACCESSORIES FOR TOPITEC
®
TOUCH
TOPITEC
®
TOUCH clamping ring
for preparation containers and power mixing system.
order no. 026633
Single-patient jar (complete)
Consisting of production container made in white POM and filling
plunger made in white POM with a screwed in M9 thread adapter
made of stainless steel for the connection of aluminium tubes
(M9) or filling adapters for other tube versions. Sterilisable with
storage box (order no. 085500) and user instructions
(order no. 080897)
Size 50 g: order no. 025707
Size 100 g: order no. 025696
Size 200 g: order no. 025669
Replacement lift bases
made in white PE, SU=10
order no. 025668
Spare fuse (10 A slow-acting / 250 VAC) 1 fuse
order no. 080426
TOPITEC
®
stock preparation system
The TOPITEC
®
stock preparation system also makes it possible for
you to produce larger formulations up to 1000 ml in the mixing
systems TOPITEC
®
AUTOMATIC, TOUCH and EXPERT. The filling
device included within the scope of delivery was designed so that
it can be positioned over common formulation scales. A filling tap
on the production container guarantees straightforward filling or
dispensing of the preparations into smaller containers. The filling
device can also be pivoted through up to 90°, which presents
an additional advantage. This enables tubes to also be filled up
by screwing them directly onto the M9 thread. Aluminium tubes
can also be filled with the assistance of optionally available tube
filling pipes in 3 sizes (7 ml - 025677, 25 ml - 025681, 35 ml -
025678). Pre-sealed plastic tubes (with a red folding hinge seal
35 ml - 036032, 75 ml - 036033, 125 ml - 036034) can also be
filled with the preparation filling adapters (028792 for 35 ml,
028793 for 75 ml, 028794 for 125 ml) which we offer as an
option. order no. 025650
To Next Page
Loading...