2
TOPITEC
®
TOUCH User Manual | 11-2020
DECLARATION OF CONFORMITY
In accordance with
• EC Machinery Directive 2006/42/EC
• EU Low Voltage Directive 2014/35/EU
• EU EMC Directive 2014/30/EU
• EU RoHS Directive 2011/65/EU
We herewith declare that the design of
Designation: TOPITEC
®
TOUCH
S/N; machine no. 33XXX-01
as brought onto the market by us conforms to the requirements above and the
DIN EN standards listed below. Harmonised standards:
Directive / standard Title
2014/30/EU
EC Directive: EMC Directive valid from
01/04/2016
Electromagnetic compatibility, emission standard – light industry
Electromagnetic compatibility, immunity standard – light industry
2014/35/EU EC Directive: Low Voltage Directive valid from 01/04/2016
DIN EN 61010-1 :2010
Safety requirements for electrical equipment for measurement, control,
and laboratory use – Part 1: General requirements
2006/42/EC EC Directive: Machinery Directive valid from 29/12/2009
DIN EN ISO 12100 :2010
Safety of machinery – General principles for design –
Risk assessment and risk reduction
DIN EN 13857 :2008
Safety of machinery – Distances to prevent hazard
zones being reached by upper and lower limbs
2011/65/EU EC Directive: RoHS valid from 03/01/2013
• This Declaration applies exclusively to the product as delivered.
• The basic requirements as regards health and safety as laid down in Annex I
of Machinery Directive 2006/42/EC are fully complied with.
• The special technical file according to Annex VII A has been compiled and shall be made
available in electronic format to the relevant state authorities on request.
To Next Page
Loading...