73
MAINTENANCE / CLEANING / INSPECTION / FUNCTION TESTING
Protect the device against mechanical impact!
Do not drop the device or any of its accessories.
When moving the device on the worktop, ensure that no electronic or mechanical components are
damaged.
Protect the device against dust!
Install and store the system and its accessories in a dust-free environment, as fine particles could damage
moving parts!
Protect the device against high temperature!
Do not install or store the system or its accessories in a room where they are exposed to high temperatures.
High temperature could damage electronic components, or lead to the deformation or melting of certain
plastic parts.
Protect the device against extreme temperature changes!
Do not install or store the system or its accessories in a room where they are exposed to very low
temperatures. As, during operation, the device is heated to operating temperature,
there is a risk of condensation inside the housing, which could damage electronic components.
Note
The average service life of the TOPITEC
®
TOUCH
is 10 years. After this time has elapsed, the device must undergo
a complete service by a specialist workshop.
Proper shut-down procedure:
Danger
Before carrying out any cleaning, maintenance or repair task,
shut down the device, following the proper shut-down
procedure (see chapter 4.5)!
To Next Page
Loading...