EasyManua.ls Logo

WERTHER INTERNATIONAL 450N - User Manual

WERTHER INTERNATIONAL 450N
53 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
I
PONTE
SOLLEVATOREA4
COLONNE
GB
4-POSTLIFT
450N-450AT
OMA43-45,4-41,64-74,80,2APAC47-49,4-41,64-74,84,2HH55-57,4-41,64-74,89,2Werther1-41,64-75
ITALGARAGE51-53,4-41,64-74,88,2ANONIMO44,4-41,64-74,2HH-LIONS59,44-45,4-41,64-74,80,2
V-TECH93,44-45,4-41,64-74,80,2

Table of Contents

Questions and Answers

  • C
    Christina IngramAug 12, 2025
    What to do if WERTHER INTERNATIONAL Lifting columns lift does not descend?
    • O
      ozunigaAug 12, 2025
      If your WERTHER INTERNATIONAL Lifting columns lift does not descend, first check for any foreign objects obstructing its path and remove them. If that's not the issue, the solenoid valve might be blocked, requiring a replacement. There could also be a malfunction in the electrical system, or the carriages may still be leaning on safety devices, so ensure the correct descent sequence is followed. Finally, block valves might have tripped, indicating damage to the hydraulic circuit that needs repair.
  • A
    Alan CastilloAug 19, 2025
    Why WERTHER INTERNATIONAL Lifting columns lift does not rise when the button is pressed, but the motor runs?
    • C
      christopherduncanAug 19, 2025
      If your WERTHER INTERNATIONAL Lifting columns lift doesn't rise when you press the button but the motor is running, it could be due to several reasons. The oil level might be too low, so you should fill it up. Another possibility is that the drain solenoid valve is open, in which case you should check the manual outlet or replace the valve. The max pressure valve might also be working, so check the load and adjust the valve accordingly. Finally, there might be leaks in the hydraulic circuit, which would require repairing the line.
  • J
    Jody AllenAug 27, 2025
    How to fix WERTHER INTERNATIONAL Lifting columns lift that does not rise when the pushbutton is pressed (motor does not run)?
    • T
      Theodore GarciaAug 27, 2025
      If your WERTHER INTERNATIONAL Lifting columns lift doesn't rise when you press the button and the motor doesn't run, it could be due to a burnt fuse, which you should replace. Alternatively, the line current may not be arriving, so try connecting it again. Finally, there might be a malfunction in the electrical system, such as a broken limit switch or a burnt motor.
  • E
    Erika JohnsonSep 4, 2025
    What to do if WERTHER INTERNATIONAL Lifting columns lift continues to rise after releasing the up pushbutton?
    • A
      Antonio HarrisSep 4, 2025
      If your WERTHER INTERNATIONAL Lifting columns lift continues to rise after releasing the up button, the button might be faulty.

WERTHER INTERNATIONAL 450N Specifications

General IconGeneral
BrandWERTHER INTERNATIONAL
Model450N
CategoryLifting columns
LanguageEnglish