What to do if the bead-breaker on my WERTHER INTERNATIONAL Tyre Changer doesn't work when I push the button?
If the bead-breaker on your WERTHER INTERNATIONAL Tyre Changer isn't working when you push the button, it could be due to a feeding pressure less than 7 atm or gaskets sticking due to a long pause. Try increasing the feeding pressure. If the issue persists, contact an authorized service center.
How to fix a blocked self-centering table pedal on a WERTHER INTERNATIONAL Tyre Changer?
If the self-centering table pedal on your WERTHER INTERNATIONAL Tyre Changer is blocked, it's likely due to gaskets sticking from a long pause. Try manually moving the pedal up and down with your hands to free it.
Why does the bead breaker on my WERTHER INTERNATIONAL Tyre Changer open and close at different speeds?
The bead breaker on your WERTHER INTERNATIONAL Tyre Changer might open and close at different speeds because the bead breaker valve is badly regulated. In this case, it's best to call an authorized service center for assistance.
Why do the self-centering table clamps on my WERTHER INTERNATIONAL Tyre Changer open at different speeds?
If the self-centering table clamps on your WERTHER INTERNATIONAL Tyre Changer are opening at different speeds, the self-centering valve may not be working correctly. It's recommended to call an authorized service center.
General| Brand | WERTHER INTERNATIONAL |
|---|---|
| Model | HYDRA SA20 |
| Category | Tyre Changers |
| Language | English |
To Next Page
