PRODUCT DIAGRAM
Congratulations on your purchase of a West Bend® Versatility Cooker!
1. Lid Handle
2. Lid
3. Cooking Vessel Handles
4. 6 QT Cooking Vessel
5. Heating Base
6. Control Panel
7. Storage Bag
8. Storage Lid
9. Grill Pan
10. Griddle Pan
11. Roasting Rack
12. Steam Basket
English - 4
BEFORE USE
1. Before using your new appliance, remove all packing material.
2. Please check packing material carefully as accessory parts may be contained within the
packing material.
3. Wash 6 QT cooking vessel, lid, grill and griddle pan, roasting rack and steam basket in
warm soapy water, rinse and dry thoroughly.
4. Wipe heating base with a soft towel.
5. Place heating base on dry, level, heat-resistant surface away from any edge.
6. Place the selected cooking vessel on the base.
7. Plug power cord into a 120 volt, AC electric outlet only.
8. This appliance is designed with fan delay for 5 minutes to allow the appliance to cool
down. The fan will continue to stay on for 5 minutes once the cycle is complete.
DO NOT IMMEDIATELY PULL OUT POWER CORD FROM THE POWER OUTLET. ALLOW THE
FAN TO COMPLETE THE COOL DOWN CYCLE.
1
4
5
12
11
4
9
10
3
3
2
6
7
8
2
5
To Next Page
Loading...
Need help?
General
