PRODUCT DIAGRAM
Before using your new appliance, follow these instructions:
1. Remove all packaing material.
2. Remove any stickers or labels from the appliance – other than the rating label.
3. Wash all accessories in hot soapy water with a non-abrasive sponge.
4. Rinse and dry thoroughly.
5. Place the appliance on a stable, horizontal and level surface that is also heat resistant.
6. Place the drip tray and any other accessory needed back in the air fryer oven.
7. Plug the power cord into wall outlet. The appliance will beep, the power light will illuminate,
and the oven will go on standby mode.
Note: When using the air fryer oven for the first time, a little smoke or odor may be emitted.
If this happens, ensure there is sufficient ventilation around the appliance.
6. Press the power button to turn on the oven.
7. Turn the function selector knob to Bake. Press the Start button to run a baking cycle
in a well-ventilated area for 15-30 minutes to remove the odor.
BEFORE USE
English - 4
Congratulations on your purchase of a West Bend Air Fryer Oven!
Control Panel
Rotisserie
Spit
Removal
Handle
Wire
Rack
Rotating
Drum
Drip Tray
Power Cord
(located in back)
Air Inlets
Selector Knob
Handle
Glass Door
Air Fry
Basket
Bake
Pan
Pizza
Pan
Skewer
Rack
To Next Page
Loading...
