Need help?Do you have a question about the West Bend CROQUADE M001 and is the answer not in the manual?
General| Brand | West Bend |
|---|---|
| Model | CROQUADE M001 |
| Category | Waffle Maker |
| Voltage | 120 V |
| Non-Stick | Yes |
| Indicator Lights | Yes |
| Type | Belgian |
| Cord Length | 3 ft |
Follow essential safety rules to prevent fire, electric shock, and injury when using the appliance.
Ensures proper use of polarized plugs and safe handling of extension cords to avoid hazards.
Wash plates in hot, soapy water, rinse, dry, and oil for first use as instructed.
Place on a heat-resistant surface and plug into a 120VAC outlet only.
Adjust temperature dial from 1 (lightest) to 8 (darkest) for desired waffle crispness.
Preheat until signal light turns off, then apply a light coating of cooking oil to plates.
Add dough or batter to the bottom plate and close the maker securely.
Bake until waffles are brown, then remove carefully using a utensil.
Unplug the unit and allow it to cool completely before cleaning or storage.
Unplug, cool, slide covers, and loosen screws to detach plates from the waffle maker.
Align plate lug with handle lug, secure with screws, and slide covers into place.
Open and close the maker several times to confirm plates are tightly secured.
Use higher thermostat settings and avoid opening too early. Use appropriate utensils.
Use wooden spatula or waffle fork; avoid metallic utensils to protect plates.
Wipe exterior with damp cloth; never immerse the base in liquid. Do not use abrasive cleaners.
Remove plates and wash by hand or dishwasher (top rack). Dry thoroughly.
Contact West Bend for assistance if the power cord is damaged.
2-year limited warranty on material/workmanship, excluding non-stick surface damage.
Contact Customer Care with proof of purchase; exclusions and return shipping costs apply.
Order parts online, via email, or phone. Contact Customer Care for order totals.
Record purchase details and product information for warranty claims.
To Next Page
