Do you have a question about the West Bend Mixer and is the answer not in the manual?
Attach mixer to stand by aligning metal pin into groove and releasing lever.
Align turntable extension with correct opening for bowl size.
Insert beaters into correct sockets, matching shapes; they are not interchangeable.
Insert dough hooks into correct sockets, matching shapes; they are not interchangeable.
Ensure mixer is OFF and securely attached to stand before use.
Position turntable according to bowl size and place bowl onto it.
Insert beaters or dough hooks into the correct sockets.
Guide to speed settings (1-12) for various tasks like kneading, mixing, and whipping.
Advice on mixer placement, bowl capacity, ingredient limits, and scraping.
Attach mixer to stand by aligning metal pin into groove and releasing lever.
Align turntable extension with correct opening for bowl size.
Insert beaters into correct sockets, matching shapes; they are not interchangeable.
Insert dough hooks into correct sockets, matching shapes; they are not interchangeable.
Ensure mixer is OFF and securely attached to stand before use.
Position turntable according to bowl size and place bowl onto it.
Insert beaters or dough hooks into the correct sockets.
Guide to speed settings (1-12) for various tasks like kneading, mixing, and whipping.
Advice on mixer placement, bowl capacity, ingredient limits, and scraping.
Loading...