WESTEK BL-PUTN - User Manual

To Next Page

BL-PUTN Ultra-Thin Puck Light Owner’s Manual

Battery Installation

1. To open, when looking at the back, twist back cover counter-clockwise

and remove.

2. Insert 3 AAA batteries (follow the illustration inside the battery compartment).

Ensure the batteries are inserted so that the at ends are making contact

with the springs.

3. To close, replace the cover and turn clockwise.

Operation

Tap the lens once for on, tap again to dim, and a third tap

will turn off the light.

Light Installation

Determine mounting location and type of mount

Need help?

Do you have a question about the WESTEK BL-PUTN and is the answer not in the manual?

Summary

Instructions for attaching the puck light using double-sided 3M adhesive tape, including surface preparation.

Steps to securely mount the puck light using screws, including drilling pilot holes.

General