To Next PageTo Next Page
Need help?Do you have a question about the Westermo MA-42 AC and is the answer not in the manual?
General| Type | Media Converter |
|---|---|
| Data Rate | 10/100 Mbps |
| Fiber Optic Connector | SC |
| Operating Temperature | -40°C to +70°C |
| Weight | 0.3 kg |
| Standards | IEC 61850-3 |
| Ports | 1 x 10/100BASE-TX, 1 x 100BASE-FX |
Defines communication mode (full/half duplex, simplex).
Specifies the RS-232-C/RS-423-A interface standard.
Specifies the RS-422/RS-485/CCITT V.11 interface standard.
States the maximum data transfer speed.
Lists the status LEDs on the unit.
Describes the galvanic insulation method.
Specifies the voltage withstand rating.
Details the surge protection capabilities.
Describes the input voltage range and frequency.
Specifies the fuse type and rating.
States the maximum power draw.
Defines the operating temperature limits.
Specifies the acceptable humidity levels.
Provides the physical size of the unit.
States the unit's weight.
Explains how the unit can be physically installed.
Configuration of transmitter activation and signal control (DCD, CTS) using S2.
Setting the delay for the CTS signal using switch S2.
Choosing between 2-wire and 4-wire communication modes using S3.
Default switch configurations for the unit.
Configuring termination and fail-safe functions with switch S3.
Details of the 5-position screw terminal line connection.
Pinout and description for the RS-232 DCE connection.
Illustrations of 4-wire and 2-wire line connections for RS-422/485.
Information on maximum transmission distance and cable specifications.
Technical specifications specific to the MA-42 DC model.
Reference to MA-42 AC switch settings for the DC model.
Connection details for the MA-42 DC, excluding power supply.
Guidance on multidrop applications and bus structure.
Controlling slave transmitters using status signals (RTS/DTR).
Explanation of the unit's LED indicators for troubleshooting.
