Need help?Do you have a question about the Westermo Pilot Wire RPW600M and is the answer not in the manual?
Safety precautions to be taken before installing the unit.
Guidelines for safe mounting, usage, and removal of the unit.
Recommendations for maintaining the unit and fulfilling warranty obligations.
Special treatment required for sensitive fibre optic equipment.
Procedures and recommended fluids for cleaning optical connectors.
Information regarding the unit's maintenance needs.
Details on RPW600M and RPW600F variants and their application.
Information on pilot wire link length, standards, and insulation.
Specifies test levels for environmental phenomena like temperature and humidity.
Details immunity tests performed on the unit and their criteria.
Details standards for radiated and conducted emissions.
Outlines environmental tests for temperature extremes.
Specifies vibration and shock resistance tests.
Covers dielectric, impulse voltage, and resistance tests.
Details voltage, current, and connection specs for power.
Specifies connection and cable requirements for Pilot Wire.
Outlines connection, fibre type, and ports for Ethernet FX.
Details data rate, format, and connection for console communication.
Describes power input terminal positions and product markings.
Details RX and TX optical connections and their directions.
Specifies Pilot Wire terminal positions and directions.
Indicates unit power status and booting process.
Shows status of Fibre link (FX) and Pilot Wire link (PW).
Displays pilot wire link quality using LED 1, 2, and 3.
Explains how QoS LEDs indicate pilot wire link status and performance.
Steps to connect and use the RPW-diagnostic tool software for advanced diagnostics.
Details mounting the unit on a 35 mm DIN-rail horizontally.
Specifies requirements for properly connecting the unit to a solid ground.
Instructions on how to remove the unit from its mounting.
Guidelines for airflow and spacing for effective convection cooling.
To Next Page
General
