Need help?Do you have a question about the Westermo TD-36 and is the answer not in the manual?
Guidelines for safe installation, restricted access, fused wiring, and cooling.
Overview of TD-36 (485) features like V.34 modem, fast connect, transient protection, and I/O capabilities.
Configures DTE speed, format, and auto-detect modes.
Configures Leased Line mode, interface selection, and RS-422/485 wiring.
Controls PLC settings, flow control, termination, factory defaults, and data compression.
Selects line speed, modulation, and RS-422/485 termination.
Configures V.23 leased line settings for speed, format, mode, and modulation.
Configures V.23 leased line termination at end points.
Instructions for mounting the unit on a 35 mm DIN-rail.
Advises on spacing for convection cooling to ensure optimal performance and service life.
Details the secure callback function for restricted access to the TD-36.
Configures TD-36 for silent answering based on received Caller ID.
Explains setting up TD-36 485 for 2-wire half duplex communication via RS-485.
Lists AT commands and DIP switch settings for 2-wire half duplex RS-485.
Lists AT commands for configuring SMS sending and transparent I/O.
Details configuring TD-36 485 to send SMS based on I/O input pulse train.
Explains TD-36 485 I/O for SMS sending and transparent I/O connection to IDW-90.
Lists AT commands for configuring TD-36 485 for SMS and transparent I/O.
To Next Page
General
