Need help?Do you have a question about the Western Digital VelociRaptor and is the answer not in the manual?
General| Interface | SATA 6 Gb/s |
|---|---|
| Average Latency | 2.99 ms |
| Non-Operating Temperature | -40°C to 70°C |
| MTBF | 1.4 million hours |
| Warranty | 5 years |
| Capacity | 1 TB |
| RPM | 10000 RPM |
| Cache | 64 MB |
| Average Seek Time | 4.2 ms |
| Seek Time | 4.2ms (read), 4.7ms (write) |
| Operating Temperature | 5°C to 55°C |
| Shock Resistance | 65 G |
| Form Factor | 3.5 inch |
Guide to accessing WD's online support website for downloads, registration, warranty, knowledge base, and installation.
Lists telephone numbers for technical support across North America, Asia Pacific, Europe, Middle East, and Africa.
Details operating systems compatible with the WD VelociRaptor drive.
Outlines necessary hardware components like SATA interface and drive bay for installation.
Provides essential precautions for handling the hard drive to prevent damage from static discharge and physical impact.
Step-by-step guidance for installing a SATA drive on Windows 7/Vista.
Details the process for installing a SATA drive on Windows XP, including driver considerations.
Details compliance with FCC Class B digital device limits for radio frequency energy.
States compliance with Canadian ICES-003 standards for Class B digital apparatus.
Lists UL standard compliance for safety of information technology and electrical business equipment.
Confirms compliance with European standards for RF emissions and generic immunity.
References TUV NORD CERT compliance with IEC-950 and EN60065 standards for safety.
Details presence of hazardous substances in WD HDD components as per China standards.
Provides guidance on how to obtain service or an RMA for WD products.
To Next Page