What to do if Westfalia Cooktop shows Error Code E5?
If your Westfalia Cooktop displays Error Code E5, it indicates that the overheating protection has been activated. To resolve this, allow the unit to cool down completely. Then, reconnect it to the power mains and switch it on again.
Why is the display inoperative on my Westfalia Laser 2000 C20C Cooktop?
If the display on your Westfalia Cooktop is inoperative, the cause may be no power. Ensure the power plug is securely plugged into the mains. Also, have the power source checked, and inspect the fuse.
What does Error Code E1 mean on a Westfalia Cooktop?
Error Code E1 on your Westfalia Cooktop indicates a low voltage issue, specifically less than 160V. It is recommended to have the power source checked by a professional to ensure it meets the required specifications.
What does Error Code E2 mean on a Westfalia Laser 2000 C20C?
Error Code E2 on your Westfalia Cooktop signifies that there is excess voltage, specifically greater than 270V. To resolve this, have the power source checked by a professional.
What does Error Code E3 mean on a Westfalia Laser 2000 C20C?
Error Code E3 on your Westfalia Cooktop indicates an IGBT open or short circuit. Have the unit repaired.
What does Error Code E6 mean on a Westfalia Laser 2000 C20C?
Error Code E6 on your Westfalia Cooktop indicates a temperature sensor open circuit. Have the unit repaired.
What does Error Code E7 mean on a Westfalia Laser 2000 C20C?
Error Code E7 on your Westfalia Cooktop indicates a temperature sensor short circuit. Have the unit repaired.
What does Error Code E8 mean on a Westfalia Laser 2000 C20C Cooktop?
Error Code E8 on your Westfalia Cooktop indicates a temperature sensor malfunction. Have the unit repaired.
General| Type | Induction Cooktop |
|---|---|
| Control Type | Touch Control |
| Material | Glass Ceramic |
| Power Supply | 220-240 V / 50-60 Hz |
| Safety Features | Child Lock, Overheat Protection, Auto Shut-off |
Ensures safe operation by detailing unit placement, ventilation, and distance requirements.
Covers risks like burns, electromagnetic interference, and electrical shock during use.
Advises on safe handling, moving the unit, and using compatible cookware.
Details on checking the power cable, handling unit damage, and electrical safety.
Explains the electromagnetic heating process and key product functionalities.
Describes the unit's auto-off features for pot detection and empty operation.
Instructions for stable placement, ventilation, and avoiding heat sources or magnetic fields.
Specifies requirements for magnetic cookware, including size and material.
Step-by-step guide for powering on, selecting heat, and adjusting settings.
Procedures for ending cooking sessions and safely unplugging the appliance.
Guidelines for safely cleaning the hotplate, casing, and operating panel.
To Next Page