Why is the air quality not improving after longtime operation of my Westinghouse Air Cleaner?
If you notice that the air quality is not improving even after using your Westinghouse Air Cleaner for a long time, especially in a heavily polluted area, it is recommended to operate the appliance in high airflow mode until the pollution diminishes. Also, the filter may require cleaning or replacement.
What to do if my Westinghouse Air Cleaner is making an abnormal noise?
If your Westinghouse Air Cleaner is making unusual noises, ensure all packaging materials have been removed. Also, check that the air inlet and outlet are not blocked by any objects. Remove any obstructions that may be blocking the airflow. If the issue persists, the device may malfunction.
Why has the airflow from my Westinghouse 1701 become slow?
If the airflow from your Westinghouse Air Cleaner becomes slow, the dust-removing filter may be blocked and need replacement. Also, ensure that all packaging materials have been removed from the appliance.
What to do if my Westinghouse 1701 is beeping and does not operate?
If your Westinghouse Air Cleaner is beeping and not working, check if the filters have been correctly installed. Re-install them to ensure they are properly in place.
What to do if my Westinghouse 1701 Air Cleaner emits an unusual smell or smog?
If your Westinghouse Air Cleaner emits an unusual smell or smog (like smoke, flame, or burning), immediately turn off the appliance and disconnect it from the power supply.
Why does my Westinghouse 1701 Air Cleaner release a mineral smell during first-time operation?
If your Westinghouse Air Cleaner releases a mineral smell during its first use, this is normal. It's due to catalytic oxidation inside the NCCO Reactor. The smell is harmless and will disappear after some operating time.
General| Brand | Westinghouse |
|---|---|
| Model | 1701 |
| Category | Air Cleaner |
| Language | English |
Critical warnings about water, cleaning, obstructions, power, damage, modification, fumes, heat, temperature, and humidity.
Precautions regarding power cord, user capabilities, supervision, and appliance limitations.
Step-by-step guide for opening the back panel, handling filters, and installing the NCCO reactor and HEPA filter.
Detailed steps for turning the appliance on/off and adjusting fan speed.
Instructions for activating Turbo Mode for high pollution and ECO Mode for energy saving.
Details the replacement procedures and reminding modes for HEPA filters and NCCO reactors.
Steps to reset the appliance indicators after replacing HEPA filters or NCCO reactors.
To Next Page
