Do you have a question about the Westinghouse CA and is the answer not in the manual?
Explains the induction disc unit, electromagnet, and flux principles.
Describes the d-c indicating contactor switch component.
Provides resistance values for the ICS unit's taps.
Details the ICS taps for pick-up settings and connection changes.
Specifies continuous and short-time current ratings for relay windings.
Mentions that only the time dial setting is required for the differential unit.
Describes the procedure for checking the relay's stationary and moving contacts.
Explains how to test the main and seal-in contacts for trip circuit integrity.
Outlines tests to verify the relay's operating current limits.
Details how to test the relay's operating time against its time-current curves.
Describes checking the relay's stationary contact position and gap.
Recommends annual checks and periodic cleaning of all contacts.
Procedure to adjust and verify the minimum operating current.
Verifies the relay's response curve against specified values.
Checks the relay's operating time against its characteristic curves.
Explains the induction disc unit, electromagnet, and flux principles.
Describes the d-c indicating contactor switch component.
Provides resistance values for the ICS unit's taps.
Details the ICS taps for pick-up settings and connection changes.
Specifies continuous and short-time current ratings for relay windings.
Mentions that only the time dial setting is required for the differential unit.
Describes the procedure for checking the relay's stationary and moving contacts.
Explains how to test the main and seal-in contacts for trip circuit integrity.
Outlines tests to verify the relay's operating current limits.
Details how to test the relay's operating time against its time-current curves.
Describes checking the relay's stationary contact position and gap.
Recommends annual checks and periodic cleaning of all contacts.
Procedure to adjust and verify the minimum operating current.
Verifies the relay's response curve against specified values.
Checks the relay's operating time against its characteristic curves.
| Type | Electromechanical Relay |
|---|---|
| Function | General Purpose |
| Operating Temperature Range | -40°C to +70°C |
| Mechanical Life | 10, 000, 000 operations |
| Contact Rating | 10A at 250VAC |
| Coil Voltage | 12VDC |
| Electrical Life | 100, 000 operations |
Loading...