Need help?Do you have a question about the Westinghouse Comet LED and is the answer not in the manual?
General| Brand | Westinghouse |
|---|---|
| Model | Comet LED |
| Category | Fan |
| Language | English |
Crucial safety warnings and detailed instructions for safe fan operation and installation.
Lists the necessary tools for installing the ceiling fan.
Illustrates and describes flush mount, downrod, and sloped ceiling installation types.
Explains the dual-finish blades and their aesthetic versatility.
Steps for unpacking, checking contents, and ensuring power is off before installation.
Specifies the need for a suitable, securely mounted outlet box for fan support.
Instructions for removing and loosening canopy screws to detach the mounting bracket.
Details on installing the mounting bracket to the outlet box using provided hardware.
Guides users in selecting the appropriate mounting method: flush, normal downrod, or extended downrod.
Steps for routing wires through the canopy and attaching it to the motor housing.
Instructions for hanging the fan assembly on the bracket for hands-free wiring.
Procedure for feeding wires and inserting the downrod into the yoke, aligning holes and pins.
How to loosen the downrod ball by removing the set screw on the downrod.
Steps for detaching the downrod ball and pin from the vertical rod.
Instructions for re-installing the pin and ball, securing it with the set screw.
Completing the downrod assembly by feeding wires and securing the yoke with pins.
Lifting and rotating the fan to connect the downrod ball notch to the mounting bracket.
Securing the fan assembly to the bracket to allow for hands-free electrical connections.
Detailed diagrams for connecting fan wires using pull chain controls.
Detailed diagrams for connecting fan wires for wall control operation.
Steps for aligning and securing the canopy to the mounting bracket using screws.
Instructions for attaching blade brackets to the fan blades with screws and washers.
How to attach the blade assembly to the motor using gaskets and screws.
Connecting the fan's molex plug to the light kit and attaching the kit to the housing.
Securing the light globe in place using retaining disks.
Assembling decorative fobs and extension chains onto the fan's pull chains.
Explains fan speed control via pull chains and direction control via slide switch.
Provides advice on checking connections, cleaning, and lubrication for fan longevity.
Remedies for a fan that won't start, including electrical checks and professional consultation.
Solutions for fan noise, focusing on screw tightness and the break-in period.
Troubleshooting steps to eliminate fan wobble by checking blade and bracket security.
Guidance for when the light kit does not work, checking bulbs and connections.
Outlines the limited lifetime warranty, what is covered, and common exclusions.
Lists and illustrates all the parts and hardware included with the fan.
To Next Page