To Next Page
A
aprilmartinAug 3, 2025
What to do if there is no water flow in Westinghouse Plumbing Product?
- RRichard RobertsAug 3, 2025
If you're experiencing no water flow with your Westinghouse Plumbing Product, first verify that the brass connector (E) is correctly installed. If the issue persists, ensure the check valve (D) is properly installed and not blocked. If the problem continues, remove the shower column (S) from the wall, loosen the L-fitting (L), and inspect the restrictor (K) for any debris. Clean the restrictor with water and then reinstall it.
General