What to do if my Westinghouse UW40T LED TV has no power?
If your Westinghouse LED TV isn't powering on, first, check if the power indicator is illuminated blue. Then, ensure the power cord is securely connected to the AC-in jack and plugged into a working AC outlet. To verify the outlet is functional, try plugging in another electrical device.
How to fix no sound on Westinghouse UW40T?
If there is no sound on your Westinghouse LED TV, first, ensure the audio input cable is properly connected to the correct terminal and the correct input mode is enabled. The volume may be muted, so press the Vol+ key to turn on the volume. You can also adjust the Bass, Treble, and Balance settings in the Audio menu. If you are using the TV speakers, make sure the TV Speakers option is set to On in the Audio menu. If you are using an external audio device, press and select Audio to ensure the TV Speakers option is set to Off in the Audio menu.
What to do if Westinghouse UW40T LED TV remote control does not work?
If your Westinghouse LED TV remote isn't working, make sure you are pressing only one button at a time. Check that the batteries are properly inserted and replace them with new ones if they are drained.
How to troubleshoot no picture on Westinghouse UW40T?
If your Westinghouse LED TV has no picture, ensure the video input cable is properly connected to the correct terminal and the correct input mode is enabled. Verify that the antenna is properly connected and the preferred channel is enabled in the channel list. You may also need to adjust the display settings.
How to fix a cut-off picture on Westinghouse LED TV?
If the picture on your Westinghouse LED TV is cut off or appears in a sidebar screen, press to adjust the Aspect ratio.
How to improve poor image quality on Westinghouse UW40T LED TV?
To improve poor image quality on your Westinghouse LED TV, check your antenna connection and rotate the antenna, waiting up to ten seconds for a signal if necessary. Reduce signal splitters and excessively long cables, and replace poor antenna cables or connectors. Press to adjust the Aspect ratio. Adjust the Noise Reduction setting in the Picture menu. In HDMI mode, ensure the external device is compatible with the LED TV.
Why are colors wrong on my Westinghouse UW40T LED TV?
If the colors on your Westinghouse LED TV are wrong, abnormal, or missing, check the video cable to ensure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. Adjust the Hue, Saturation, and Color Temperature settings in the Picture menu. Connect the TV to another computer to check if the problem is with the computer screen.
What to do if no picture or 'No Signal' appears when a VGA cable is connected to my Westinghouse UW40T?
If you see no picture or a 'No Signal' message when a VGA cable is connected to your Westinghouse LED TV, ensure the VGA cable is properly connected to the LED TV’s VGA port. Decrease the video resolution setting on the computer and try again. You might also need to adjust the display settings.
General| Brand | Westinghouse |
|---|---|
| Model | UW40T series |
| Category | LED TV |
| Language | English |
To reduce risk of fire/shock: avoid moisture, no user-serviceable parts, use grounded outlet.
Route power cords to avoid being walked on or pinched; inspect for damage.
Keep ventilation slots and openings clear to prevent overheating and ensure operation.
Important notices concerning power cord selection and guidelines for replacement.
Equipment tested and compliant with FCC limits for Class B digital devices, providing protection against harmful interference.
General safety instructions for operating the LED TV, including handling, environment, and maintenance.
Avoid overloading outlets, extension cords, or power strips to prevent fire or electronic shock.
Route power supply cords to avoid damage; install near an accessible wall socket outlet.
Keep ventilation slots and openings clear to prevent overheating and ensure reliable operation.
General warnings and precautions for using the LED TV, including handling, environment, and potential hazards.
Safety guidelines for outdoor antenna grounding to prevent voltage surges and static charges.
Precautions for protecting the TV during lightning storms, including unplugging.
Warnings about locating antennas away from power lines to avoid fatal contact.
Instructions for cleaning the screen and case of the LED TV safely and effectively.
Information regarding Dolby Laboratories and its trademarks.
Details about SRS Labs, Inc. trademarks and TruSurround HD technology.
Information about third-party software licenses (GPL, LGPL) included with the product.
Instructions and cautions for installing batteries in the remote control.
Information on the effective range and coverage angle of the remote control.
Step-by-step guide on how to attach the TV stand base to the LED TV unit.
Instructions for safely detaching the TV stand base from the LED TV.
Diagrams and instructions for connecting an outdoor antenna using coaxial or twin-lead cables.
Guidance on connecting cable TV service, including the use of converters/descramblers.
Instructions for connecting the AC adapter and power cord to the LED TV and power outlet.
How to turn on the TV and begin the initial setup process using the SetupWizard.
Guide for setting up language, time zone, and performing channel scan for HDTV.
Instructions to obtain an activation code for scanning and accessing local over-the-air channels.
Steps to enter the activation code using the remote control keypad.
Setup guide for connecting via cable or satellite box, including language and time zone selection.
Instructions to select the local time zone for the TV.
Guide through scanning channels or accessing connected set-top-box.
Procedure to scan cable/satellite ATSC channels after activation.
Procedure to select 'Yes' or 'No' for using a cable/satellite box connection.
Guidance on selecting the optimal connection type (HDMI, Component, Coaxial) for cable/satellite boxes.
Warning against using RF connection due to poor video signal quality.
Instructions to obtain an activation code for scanning and accessing cable/satellite channels.
Steps to enter the activation code using the remote control keypad.
Setup guide for connecting without cable/satellite, including language and time zone selection.
Guide through scanning channels or accessing connected set-top-box.
Procedure to scan cable/satellite ATSC channels after activation.
Procedure to select 'No' for not using a cable/satellite box connection.
Instructions to obtain an activation code for scanning and accessing cable/satellite channels.
Steps to enter the activation code using the remote control keypad.
Instructions on how to power the LED TV on and off using the control panel or remote.
How to adjust the TV volume using the volume buttons and mute function.
Methods for changing channels using channel buttons, number keys, and favorite channels.
Ways to select the video input source using individual input keys or the input key.
Options to adjust the display format (Standard, Fill, Overscan, 1:1 Mode) for optimal viewing.
How to adjust the LED backlight for different viewing conditions (Bright, Medium, Dark Room).
How to display and navigate through the LED TV's setup menu screens.
Sub-menus for configuring display quality: Brightness, Contrast, Saturation, etc.
Instructions to adjust the luminance level of the display.
Instructions to adjust the brightness to darkness ratio of the display.
Instructions to adjust the color intensity of the display.
Selection of preset view options (Showroom, Movie, Game, Sports, Custom) for different conditions.
Instructions to adjust the sharpness or softness of the display.
Adjusting the white balance for display colors (Warm, Neutral, Cool).
Sub-menu to select the aspect ratio of the display (Standard, Fill, Overscan, 1:1 Mode).
Adjusting display settings (Aspect Ratio, Position, Fine Tune, Auto Sync) for VGA input.
Selecting display aspect ratio: 1:1 Mode, Standard, or Fill.
Adjusting the horizontal position of the display.
Adjusting the vertical position of the display.
Fine-tuning the display for optimal picture quality.
Synchronizing the display automatically.
Managing channel list, language, sound, and scanning for TV channels.
Selecting channels to skip in the channel list.
Assigning a name to a channel.
Selecting multichannel television sound options (Mono, Stereo, SAP).
Scanning for receivable channels automatically via Cable or Air.
Manually adding channels by entering the channel number.
Configuring operational setup and viewing firmware version: Date/Time, Captions, Parental Control, etc.
Adjusting the current date, time, and time zone settings.
Configuring closed captioning settings: ON/OFF, Analog/Digital Type, Font, Size, Color, Opacity.
Blocking channels and changing the password for parental control.
Customizing US TV rating programs (TV-Y, TV-PG, etc.) for allowable content.
Selecting allowable movie ratings (G, PG, PG-13, R, NC-17, X).
Selecting Canadian TV program and movie classification categories.
Selecting French Canadian TV program and movie ratings.
Blocking specific channels from being viewed.
Changing the current password for Parental Control.
Adjusting the duration the On-Screen Display (OSD) remains visible.
Selecting the display language for menus and messages (English, French, Spanish).
Configuring power-related settings: Backlight and Dynamic Contrast.
Resetting all LED TV operational settings to factory defaults.
Viewing the LED TV's serial number and firmware version.
Important reminders for safely mounting the TV on a wall.
To Next Page