Need help?Do you have a question about the Westmed ANAPOD and is the answer not in the manual?
Details the main power switch, fuses, and AC power connection on the rear panel.
Describes temperature control buttons, alarm silence, and sensor cable connector.
Explains the function of LED indicators for power, set temperature, and alarms.
Describes the breathing circuit temperature display and its indicators.
Details the conditions that trigger audible alarms and their characteristics.
Indicates a probe failure or circuit disconnect, disabling the heater.
Indicates the wick circuit internal temperature has exceeded 47.5°C.
Details input voltage, current, output power, and leakage requirements.
Covers humidification output, flow rates, gas path resistance, and warm-up time.
Includes operating temperature, altitude, and storage conditions.
Covers device classification, protection types, and physical dimensions.
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Westmed |
| Model | ANAPOD |
| Weight | Varies by model |
| Dimensions | Varies by model |
| Color | Varies by model |
| Sterility | Sterile |
| Regulatory Compliance | Meets relevant medical device standards (e.g., ISO 13485, FDA) |
To Next Page
