4UHC9 Westward Operating Instructions and Parts Manual
80 Lb. Walk Behind Spreader
STEP 1：
1. When assembling the wheels, please keep the
air valves facing outward for easier inflation.
2. Slide one tire (#29) onto Side A of the axle. Align
the hole in the axle with the hole in the wheel,
then insert a M6 x 60 bolt (#36) through both
holes and fasten with lock nut M6 (#25). Attach
axle end cover (#31) by tapping with a wooden or
rubber mallet.
3. Slide the other tire (#29) onto Side B of the axle.
Slip a flat washer Ø 16 (#30) onto the axle next to
the wheel. Attach axle end cover (#31) by tapping
with a wooden or rubber mallet.
Side A
Side B
4
To Next Page
Loading...