Need help?Do you have a question about the Westwood S1500H and is the answer not in the manual?
General| Brand | Westwood |
|---|---|
| Model | S1500H |
| Category | Lawn Mower |
| Language | English |
Details the various controls for operating the tractor, including seat, choke, and ignition.
Adjusting the tractor seat forward and backward for operator comfort and proper positioning.
Controls fuel-air mixture for starting cold engines, used with fast throttle.
Key start controls ignition and starter; engine starts with park brake on.
Lever controls engine speed for FAST or SLOW operation, recommended FAST.
Monitors engine speed, flashing below 2600rpm indicates need to adjust speed or height.
Explains forward and reverse speed control via foot pedals and hydrostatic transmission.
How to start moving forward or in reverse using drive pedals and parking brake.
Procedure for stopping the tractor by releasing drive pedals or emergency braking.
How to engage the parking brake lever to secure the tractor when stopped.
Disengages hydrostatic transmission to allow manual pushing of the tractor.
Engages both drive wheels for traction; use with caution on slippery surfaces.
Controls the electromagnetic blade clutch to engage or disengage the cutter deck.
Adjusts cutting deck height via rotary switch and display indicator.
Operates cutter deck height using a trigger and lever mechanism.
Tracks engine hours for service intervals, shown on RPM display.
Alert displayed when fuel level is critically low, requiring refuelling.
Operates auxiliary lift for grass collector, raising or lowering it.
Empties the powered grass collector by opening and closing the net.
Lever system to engage and disengage PTO drive for attachments.
Turns headlights on and off using a rocker switch; requires ignition to be on.
Warns if tractor exceeds safe operating angles on slopes.
Dashboard indicators for battery charge and fuel level on Mini tractor models.
Instructions for fitting, using, and maintaining the Powered Grass Collector attachment.
Step-by-step guide for fitting the collection net to the collector assembly.
Uses a lever to raise or lower the PGC to transport or collecting positions.
Procedure for emptying the grass collector by tipping it at the designated area.
Guide for correctly installing the drive belt for the PGC PTO.
Detailed steps for removing and refitting the net on S & T Series collectors.
Detailed steps for removing and refitting the net on V Series collectors.
How to connect the PGC to the tractor using lift arms and PTO.
Instructions for connecting the net empty plug to its socket before use.
Adjusting the sweeper height lever for optimal performance and brush preservation.
Step-by-step guide for effective grass cutting and collection using the tractor.
Describes switching between mulch and rear discharge modes on Combi decks.
Details dual-functionality of Mini Combi deck for mulch and rear discharge.
Guidance for using the high grass mulch deck for tall or paddock grass.
Explains benefits and rules for mulch mowing to feed the lawn and save time.
Diagrams illustrating belt arrangements for various cutter deck models.
Refers to the engine manufacturer's handbook for engine-specific maintenance procedures.
Guidelines for maintaining the tractor battery, including charging rate.
Procedures for removing the cutter deck for servicing and cleaning.
Explains how to check and adjust the engine to cutter drive belt tension correctly.
Information on the self-tensioning transmission drive belt and dealer adjustment requirements.
Details location and level checking of transmission oil tank for 4WD models.
Information on the self-tensioning PTO drive belt and dealer adjustment requirements.
Steps for installing and checking the tension of accessory drive belts.
Checks for issues preventing cutter deck start or causing it to stop.
Identifies causes for overall unevenness in the grass cut.
Diagnoses why cut might be shorter on one side than the other.
Addresses issues causing unevenness or untidiness in specific cut areas.
Troubleshooting steps for cutter power loss or drive belt slipping.
Procedure to ensure the cutter deck is level from front to back.
Procedure to ensure the cutter deck is level from side to side.
Checks for issues preventing the grass collector from picking up grass effectively.
Addresses common causes and solutions for frequent tyre punctures.
Checks and conditions leading to tyres spinning or losing traction.
Step-by-step guide for safely removing the front wheel of the tractor.
Step-by-step guide for safely removing the rear wheel of the tractor.
Checks for issues preventing engine cranking when the key is turned.
Diagnoses reasons engine cranks but fails to ignite and run.
Troubleshooting steps for engine performance issues like misfiring or power loss.
Checks for problems preventing cutter deck engagement or function.
Checks for issues preventing tractor headlights from working.
Diagnoses problems with electric deck lift system, including PCB resets.
Troubleshooting steps for electric sweeper lift system and related fuses.
Addresses issues with electric sweeper net empty function and connections.
Diagnoses problems where deck lift failure affects HE circuits or engine performance.
Interprets 'C' indicator in park brake window, suggesting charging problems.
Checks issues preventing tractor display activation or tractor starting.
Explains preset service intervals and service indicator light function.
Lists model weights and Powered Grass Collector capacity.
Provides fuel tank capacity, transmission types, turning radius, and speeds.
Details tyre pressures, overall dimensions, and turning radius for models.
Tabulated engine details: displacement, power, torque, bore, stroke for each model.
Lists the weight of the V25-50HE model and its PGC capacity.
Details turning radius, forward speeds, tyre pressures, and engine specs for the V Series.
A form to record details of each service, including date, hours, and dealer signature.
Details procedure and standards for declaring product conformity with directives.
The manufacturer's declaration that the product conforms to specified standards.
To Next Page
