Wet Sounds a link plus User Manual

w e t s o u n d s
a link plus
owner’s manual
rev 1.0
Thank You for purchasing the
Wet Sounds a link plus kit!
Wet Sounds products represent the ultimate
in high performance, element-proof audio.
Wet Sounds products are specically
designed and engineered to withstand the
rigorous marine and outdoor environments.
The Wet Sounds a link plus is a wireless
audio link that allows broadcasting from one
audio system to another. Each a link plus
can be set to either send or receive audio as
needed.
Up to four (4) a link plus units can be
bonded to receive the same audio from one
(1) broadcasting a link plus, allowing for a
shared experience through multiple audio
systems.
Please take a moment to look over this
owners manual before enjoying the product.
Congratulations!
controls / indicators
Power Button
Status LED
Bond LED
Battery LED
Bond Button
Volume Down Volume Up
RED
•Transmit Mode
GREEN
•Receive Mode
Power ON
Hold 1 sec
Power OFF
Hold until LEDs go off
Switch Modes
(Transmit/Receive)
Tap once while ON
Orange Flashing
(1 sec on, 1 sec off)
•Low Battery
Orange Flashing Burst
(3 quick ashes)
•Critically Low Battery
Orange Solid
•Charging
Add / Delete Favorite
Hold a few seconds
Rotate thru Favorites
Click one (1) time
Enter Explore Mode
Click two (2) times
Multi-Color - See
essential functions
page for more info.
3.5mm aux cable
3.5mm aux y-cable
TransmitterReceiver
connection harness
(audio system)
phone or other
audio source
(audio system)
red 3.5mm
(female)
black 3.5mm
(female)
micro USB charge
connector (female)
connectors / cables

Wet Sounds a link plus Specifications

General

Zone Control	Yes
Bluetooth	Yes
USB Input	Yes
AUX Input	Yes
Waterproof	Yes
Waterproof Rating	IPX6
Preamp Outputs	Yes
Display Type	LCD

Summary

Controls and Indicators

Status and Battery LEDs

LEDs indicating transmit/receive mode, battery level, and charging status.

Bond LED and Buttons

LED for bonding status and buttons for power, mode switching, and favorites.

Volume and Connectivity

Controls for volume adjustment and connection ports for audio and charging.

Essential Functions

Powering On and Off

Instructions for turning the a link plus unit on and off.

Bonding Your a link plus

Guide to wirelessly connecting two a link plus units for audio transmission.

Favorites List and Explore Mode

Managing paired transmitters and searching for new ones.

LED Indicators Explained

Battery and Mode Indicators

Visual feedback for battery status and transmission modes.

Bonding and Favorites Indicators

LEDs showing search status, bonded connections, and favorite management.

Installation and Features

Mounting Instructions

Guidance on positioning the unit for optimal performance and range.

Cradle and Suction Cups

Details on the integrated cradle and suction cups for secure mounting.

SKAA Compatibility

Information regarding the unit's compliance with the SKAA wireless standard.

Bond Button Commands

Essentials: Favorites Management

Commands for adding, deleting, and cycling through favorite transmitters.

Other Commands: Mute, Red Mode, Reset

Commands for muting, selecting specific transmitters, and factory resetting.

Cluster Creation Commands

Procedure for creating a multi-receiver cluster and LED feedback.

Questions and Answers

Favorites Mode Operation

Explanation of how the Favorites Mode searches and selects transmitters.

Bonding and Transmitter Selection

Steps for bonding with specific transmitters and selecting desired ones.

Favorites List Management

Instructions for deleting transmitters from the Favorites List.

Cluster Management

Details on master receivers, unclustering, cluster tips, and compatibility.