Need help?Do you have a question about the Wet Sounds ST-AS 10 and is the answer not in the manual?
General| Size | 10 inches |
|---|---|
| Power Handling (RMS) | 300 Watts |
| Peak Power Handling | 600 Watts |
| Impedance | 4 Ohms |
| Sensitivity | 86 dB |
| Mounting Depth | 5.75 inches |
| Woofer Composition | Polypropylene |
| Surround Material | Rubber |
| Type | Subwoofer |
| Enclosure Type | Sealed/Ported |
Mount the subwoofer enclosure securely to a flat surface using supplied hardware, rotating feet if needed.
Details connecting the subwoofer harness to vehicle power for gas/diesel or electric vehicles via DC-DC converter.
Mount the remote level control in an accessible location and route its cable away from noise for easy adjustment.
Explains the three turn-on options (REM, DC OFFSET, AUDIO) for the ST series subwoofer amplifier.
Details how to adjust amplifier gain to match source unit output, avoiding distortion for optimal performance.
Explains how to adjust the crossover, bass boost, and phase controls for optimal subwoofer performance.
Lists technical specifications for the ST-AS10 and ST-AS6 models, including power, frequency response, and dimensions.
Defines what the limited warranty covers, including defects in materials and workmanship for the original purchaser.
States the warranty extends for 2 years and recommends online registration within 45 days of purchase.
Lists exclusions from the warranty, such as fading, damage from misuse, or improper installation.
Explains Wet Sounds' commitment to repair or replace defective products, including options for refurbished units.
Provides instructions on how to contact Wet Sounds for service, including obtaining a Return Manufacturer's Authorization (RMA).
Warns that products sold on unauthorized websites void the manufacturer's warranty.
To Next Page