EasyManua.ls Logo

Wet Sounds STEALTH AS Series User Manual

Wet Sounds STEALTH AS Series
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ST-AS 10 / ST-AS 8 / ST-AS 6
ACTIVE SUBWOOFER ENCLOSURE
INSTALLATION / OWNER'S MANUAL
wetsounds. com
HIGH PERFORMANCE AUDIO
REV DATE JUNE 2017
STEALTH AS SERIES
Question and Answer IconNeed help?

Do you have a question about the Wet Sounds STEALTH AS Series and is the answer not in the manual?

Wet Sounds STEALTH AS Series Specifications

General IconGeneral
Enclosure TypeSealed
ColorBlack
RMS Watts150W
Peak Watts300W
Nominal Impedance4 Ohms
Woofer Size6.5 inch
Weather ResistanceYes

Summary

Thank You

Installation Instructions

Mounting

Details on securely mounting the subwoofer enclosure using supplied hardware for various ST AS models.

Wiring Harness

Instructions for connecting the wiring harness for gas/diesel and electric vehicles, including DC-DC converter notes.

Remote Level Control Routing

Guidance on routing the blue remote turn-on wire and 3.5mm signal input and remote level control cables.

Amplifier Adjustments

Auto Turn On Switch

Explains REM, AUDIO, and DC OFFSET settings for automatic amplifier turn-on based on source unit.

Gain Adjustment

How to adjust amplifier gain sensitivity to match source unit output and avoid distortion.

Crossover and Bass Boost

Adjusting crossover network frequency and bass boost level for optimal subwoofer output.

Phase Control

Adjusting the phase control to optimize subwoofer output based on location and listening preference.

Specifications

Limited Warranty

Warranty Coverage

Details what the limited warranty covers, coverage duration, and registration recommendation.

Exclusions

Lists conditions and damages not covered by the warranty, including misuse and shipping costs.

Service Procedure

Explains how to get service, including contacting Wet Sounds, obtaining RMA, and internet sales warning.

Related product manuals