Need help?Do you have a question about the Whadda L298N and is the answer not in the manual?
General| Peak Current per Channel | 2 A |
|---|---|
| Logic Current | 0 - 36 mA |
| Maximum Power Dissipation | 25 W |
| Operating Voltage | 5V to 35V |
| Logic Voltage | 5V |
| Control Method | TTL |
| Enable Pins | 2 |
| Input Pins per Channel | 2 |
| Dimensions | 43mm x 43mm x 27mm |
Information regarding the safe and environmentally friendly disposal of the device after its lifecycle.
Guidelines for safe operation, including age restrictions and supervision requirements.
Covers warranty, usage, modifications, and responsibility for product use.
Overview of the module's capabilities for controlling DC and stepper motors.
Technical details including driver, power supply, output current, and dimensions.
Layout and description of the module's input/output pins.
Wiring and code example for controlling two DC motors using the board.
Wiring and code example for controlling a stepper motor using the board.
To Next Page