What to do if my Whale Easi-Slide pump will not run?
If your Whale Accessories pump isn't running, try the following: Ensure at least one tap is open. Verify the battery condition and that the mains isolator switch is on. Also, check that the pump isolator switch is on. Clean the contacts in the plug and socket, check wiring connections, and inspect the fuse. As a last resort, try turning the pump isolator switch off and on again.
Why does my Whale Easi-Slide Accessories pump cycle on and off when all taps are closed?
If your Whale Accessories pump cycles on and off when all taps and the shower are closed, check for air or water leaks in the taps and piping. Also, inspect the non-return valve in the socket for grit; try dislodging any trapped grit by pushing a blunt object into the socket nipple against the non-return valve. If the pump is within its 1-year warranty, contact the retailer to replace it.
General| Brand | Whale |
|---|---|
| Model | Easi-Slide Series |
| Category | Accessories |
| Language | English |
To Next Page
