Before installation, ensure the appliance has been supplied in good condition and if damaged do not install.
A competent person should install the appliance in accordance with the appliance installation instructions. This
appliance is for use with LPG (see appliance data plate) and mains electricity (230V a.c.). Check that the product is
suitable for the intended application, in particular the installer must check the compatibility of the data plate
information with the LPG supply requirements of the vehicle. Follow these installation instructions and ensure all
relevant personnel read the points listed below. Also ensure that these operating instructions are passed on to the
end user.
Please note: The appliance should be installed in accordance with any relevant regulations in the country where the
appliance is installed. For this appliance in Europe the standard is BS EN 1949:2002 “Specification for the installation
of LPG systems for habitation purposes in leisure accommodation vehicles and in other road vehicles”.
Ventilation must comply with relevant national and/or local requirements.
DIMENSIONS
In vehicle installation
Fig. 4
Fig. 5
7
To Next Page
Loading...
Need help?
General
