Need help?Do you have a question about the Wharfedale Pro SL1224USB and is the answer not in the manual?
General| Brand | Wharfedale Pro |
|---|---|
| Model | SL1224USB |
| Category | Music Mixer |
| Language | English |
Comprehensive safety guidelines covering usage, placement, and handling of the apparatus.
Precautions regarding electric shock, internal components, and correct product disposal.
Balanced XLR input for connecting microphones.
Balanced/Unbalanced TRS input for line level sources.
High Pass Filter with 80Hz cutoff point.
TRS insert point for processors or direct output.
Gain control for calibrating sources and gain structure.
High, Mid, and Low EQ controls for tone shaping.
Pre/Post fader auxiliary sends for monitor mixes or effects.
Sends to the internal FX engine.
Spatially places the channel within the stereo field.
Pre Fade Listen for monitoring channel gain and signal.
Peak and Signal indicators show clipping and signal presence.
Sends channel signal to main mix or USB recording bus.
Sets signal amount sent to main or USB bus.
Balanced/Unbalanced TRS input for the left channel or mono line.
Switches between USB and line level source.
Balanced/Unbalanced TRS input for the right channel.
Gain control for calibrating sources and gain structure.
High, Mid, and Low EQ controls for tone shaping.
Pre/Post fader auxiliary sends for monitor mixes or effects.
Sends to the internal FX engine.
Spatially places the channel within the stereo field.
Pre Fade Listen for monitoring channel gain and signal.
Peak and Signal indicators show clipping and signal presence.
Sends channel signal to main mix or USB recording bus.
Sets signal amount sent to main or USB bus.
FX output to Aux 1 and Aux 2 for monitor mixes.
Selects the effect algorithm from a list.
Shows FX bus overload and signal reception.
Turns the FX processor on or off.
Sends the FX processor output to the main mix bus.
Controls overall levels for Aux 1, Aux 2, and FX buses.
Controls the level of the Aux Return input.
Connects external effect processor output or utility input.
Outputs signal to respective buses for processors or monitors.
Connects to power amplifier or active speakers for monitoring.
Connects to computer for recording and playback.
For connecting headphones.
Switches and indicates +48v phantom power activity.
Indicates AC power supply status.
Shows master bus level and PFL levels.
Controls level for control room and headphone outputs.
Controls the master level of the USB recording bus.
Controls the master level of the main mix bus.
IEC receptacle for AC power supply.
Toggles the power on or off.
Balanced XLR main outputs.
Balanced/unbalanced TRS main outputs.
Feeds USB bus signal to an external recorder.
To Next Page