Need help?Do you have a question about the Wheatfield Audio HA-4 and is the answer not in the manual?
General| Type | Headphone Amplifier |
|---|---|
| Number of Channels | 2 |
| Input Impedance | 10kΩ |
| Inputs | RCA |
| Output Impedance | 10Ω |
| Frequency Response | 10Hz - 20kHz |
| Power Supply | External AC adaptor |
| Outputs | 1/4" Headphone Jack |
| Signal-to-Noise Ratio | 95 dB |
| Dimensions | 150mm x 100mm x 50mm |
Covers power requirements and fuse types.
Describes the status LEDs for power and output.
Covers Volume, Crossfeed, and Bypass switch functions.
Details the 20kHz, 2.5kHz, and 90Hz EQ adjustments.
Setting voltage selector and connecting AC power.
Connecting audio sources via RCA cables.
Connecting headphones and compatibility.
How the volume control adjusts listening level and gain.
Details EQ frequency bands and boost levels.
Simulating speaker crossfeed and its settings.
Bypassing EQ and crossfeed for flat response.
To Next Page