AFTER ASSEMBLY
Unfolding WHEELA
Unfasten the elastic safety hook-strip, and unfold
Wheela by holding the handlebars with one hand
and lifting the saddle upwards with the other
hand.
Attach the end of the rod to its slot located on the
top of the aft tube.
Securing the rod
In unfolded position, secure the rod with the hook-strip as shown in the picture. This prevents the
rod from unintentionally detaching from its slot.
Fine-tuning WHEELA’s height
WHEELA’s seat height can be slightly adjusted by
rotating the rod. Its default delivery setting is in
the middle of its range. By turning the rod clock-
or anti-clockwise, you can fine-tune the height of
the saddle to your personal preference.
To Next Page
Loading...