To Next PageTo Next PageWhat to do if my Wheeltech Scooter will not switch on?
If your Wheeltech Scooter won't switch on, there are several potential causes. First, ensure the batteries are properly connected. Second, verify the connection on the front-to-rear loom. Finally, check if the circuit breaker has tripped and, if so, push the circuit breaker button to restart it.
Why my Wheeltech Scooter will switch on but will not run?
If your Wheeltech Scooter switches on but doesn't run, consider these possibilities: the batteries may be flat, so check the battery power; the charger might still be plugged in, so unplug it; or the motor could be in freewheel mode, so re-engage the freewheel lever.
User must be familiar with operation and follow safety notice.
Guidelines for safe operation while the scooter is in use.
Read all labels before driving; do not remove them.
Explains EMI sources, impact on scooter controls, warnings, and immunity levels.
Identifies and explains the functions of the control panel components.
Step-by-step guide on operating the scooter's key functions and controls.
Instructions on engaging and disengaging the freewheel mode for manual movement.
Steps and checks required before starting and driving the scooter.
Step-by-step procedure for charging the scooter's battery.
Details on the charger, its LEDs, and battery maintenance guidelines.
Daily checks and regular maintenance schedule for the scooter.
Details on inspecting and maintaining the battery, fuse, and tyres.
Guidelines for cleaning, general maintenance, and proper storage of the scooter.
Procedures for moving, disassembling, and reassembling the scooter.
Section for recording the scooter's VIN and serial numbers for service.
Details the terms, conditions, and coverage of the scooter's warranty.
General