Need help?Do you have a question about the Whip Mix Pro Press 200 and is the answer not in the manual?
General| Model | Pro Press 200 |
|---|---|
| Manufacturer | Whip Mix |
| Maximum Temperature | 1200°C |
| Heating Method | Electric |
| Control Type | Digital |
| Power Supply | AC |
| Type | Furnace |
| Temperature Range | Ambient to 1200°C |
| Programs | Multiple programmable cycles |
| Voltage | 240V |
| Heating Rate | Up to 120°C/min |
| Cooling Rate | Varies by program |
| Chamber Size | 150 x 150 x 150 mm |
Connect compressed air supply to the regulator for the Pro Press 200.
Options to look at, add/edit, copy, move, or erase programs.
Access settings like Night Mode, vacuum, temperature units, language, and calibration.
Adjust and activate the Night Mode feature to reduce temperature and prevent moisture.
Set the idle temperature the furnace maintains between programs.
List of functions requiring specific passwords for access.
Settings for hold temperature and duration.
Configuration for Argon gas flow during firing.
Set the desired vacuum level for intermittent vacuum cycles.
Adjustments for fusing and cooling parameters.
Configuration for pressing time and re-press time.
Repeat the last executed program with a single button press.
Information displayed on the screen during program execution.
Details on Argon gas requirements and installation for the Pro 200.
Not Enough Vacuum, Duplicate Name, Check Programs, Temp Cal Error, Vac Cal Error, Max Temp Error, Thermocouple Error.
To Next Page
