To Next PageTo Next PageWhat to do if my Whirlpool Hob displays error F42 or F43?
If your Whirlpool Hob displays error codes F42 or F43, it indicates that the sensor has detected a discrepancy between the appliance voltage and the mains supply. To resolve this, disconnect the hob from the mains and check the electrical connection.
Why does my Whirlpool ACM 808/BA Hob show error codes C81 or C82?
Error codes C81 or C82 on your Whirlpool Hob indicate that the internal temperature of the electronic parts is too high. Wait for the hob to cool down before using it again.
General| Hob type | Zone induction hob |
|---|---|
| Product color | Black |
| Top surface type | Glass |
| Appliance placement | Built-in |
| Cooking zone 1 type | Simmer |
| Cooking zone 2 type | Large |
| Cooking zone 4 type | Regular |
| Cooking zone 3 shape | Rectangular |
| Flexible cooking zone | Yes |
| Cooking zone 1 position | Left front |
| Cooking zone 2 diameter | 180 mm |
| Cooking zone 2 position | Left rear |
| Cooking zone 3 position | Right rear |
| Cooking zone 4 position | Right front |
| Number of cooking zones | 4 zone(s) |
| Simmer cooking zone shape | Round |
| Cooking zone 3 power source | Electric |
| Number of gas cooking zones | 0 zone(s) |
| Simmer cooking zone diameter | 145 mm |
| Regular cooking zone diameter | 210 mm |
| Control type | Touch |
| Built-in display | No |
| Control position | Top front |
| Number of power levels | - |
| Current | 31.3 A |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | 0 W |
| Connected load (electric) | 7200 W |
| Package depth | 590 mm |
| Package width | 670 mm |
| Package height | 140 mm |
| Package weight | 13500 g |
Weight and Dimensions| Depth | 510 mm |
|---|---|
| Width | 580 mm |
| Height | 56 mm |
| Weight | 12500 g |
| Installation compartment depth | 490 mm |
| Installation compartment width | 560 mm |
| Installation compartment height | 30 mm |
Explains the meaning of danger and warning symbols used in the manual.
Lists essential safety measures for installation, use, and maintenance of the appliance.
Instructions for recycling and proper disposal of packing material and the appliance (WEEE).
Provides advice on how to use the appliance efficiently and save energy during cooking.
Guidelines on checking pot suitability for induction hobs and proper placement.
Instructions for preparing the cabinet, including separator panel requirements and clearances.
Details on connecting the appliance to the power supply, including cable types and wiring diagrams.
Overview of the control panel, including buttons, displays, and indicators.
Procedure for turning the hob on and off, and automatic switch-off function.
How to select and adjust power levels for each cooking zone, including Booster function.
Steps to switch off individual cooking zones or deactivate them instantly.
How to activate and deactivate the control panel lock to prevent accidental changes.
Using the timer to set cooking durations for zones and its automatic switch-off.
Explanation of the 'H' indicator showing hot cooking zones and its usage.
Meaning of the 'no pot' message and auto-switch off for unsuitable or missing cookware.
Activating the Booster function for rapid heating and its automatic reduction after 10 minutes.
Using EcoBooster for controlled boiling, energy saving, and spill prevention.
Utilizing cooking zones as single large or multiple small zones for various cookware.
Important warnings and precautions to take before and during cleaning the hob.
Step-by-step guide for cleaning the hob, including recommended materials and methods.
List of error codes, their descriptions, possible causes, and recommended solutions.
Steps to take before contacting service and information required for support.
Details the power levels, corresponding cooking types, and recommended usage for optimal results.
