5
Tools Needed:
8" (203 mm) 8" (203 mm) or 10" (254 mm) Flat-Blade Screwdriver Phillips Screwdriver
or 10" (254 mm) Adjustable Wrench
Pipe Wrench that opens to 1" (25 mm)
Torx
®†
T-20 Security 1" (25 mm) Hex-Head 5⁄16" (8 mm) Socket Wrench Pliers (that open to
Screwdriver or Bit Socket Wrench 1
9
/
16
" [39 mm])
Level Utility Knife 1/4" (6 mm) Nut Driver 27" (686 mm)
Wood Block
Caulk Gun and Caulk Vent Clamps Pipe-Joint Compound Putty Knife
(for installing new exhaust vent) Suitable for Gas Type
Flashlight (optional) 1" (25 mm) Ruler or Measuring Tape
Open-End Wrenches
TOOLS & PARTS
†® TORX and T25 are registered trademarks of Acument Intellectual Properties, LLC.
Parts Supplied:
Foot Boots (4) Leveling Legs (4) Security Cone
(on some models)
Service Door Lock Assembly
(on some models)
Coin Slide Decal Kit
(on some models)
6-Pin 30-Minute Timing Cam
(on some models)
3-Pin 60-Minute Timing Cam
(on some models)
5
/16" Hex Head –
18 x 2½" Security Bolt
(on some models)
252525
25252525
2525252525
25 2525252525
25 25 2525252525
25 25 252525252525
$2.00
$1.75
$1.50
$1.25
$1.00
$0.75
To Next Page
Loading...
