Do you have a question about the Whirlpool DU1055XTVS - 24" - Dishwasher and is the answer not in the manual?
Type | Built-In |
---|---|
Width | 24 in |
Capacity | 14 Place Settings |
Wash Cycles | 6 |
Energy Star Certified | Yes |
Noise Level | 55 dBA |
Color | Stainless Steel |
Place Settings | 14 |
Soil Sensor | Yes |
Third Rack | No |
Stainless Steel Tub | Yes |
Delay Start | Yes |
Heated Dry | Yes |
Height | 34.5 in |
Depth | 24 inches |
Includes instructions, installation, energy guide, and tech sheets.
Front panel, access panel, insulation, toe panel and related hardware.
Main console unit including overlay and insert for control panel.
Various small parts like screws, clips, actuators, and switches for the control panel.
Inner door panel, vent gasket, and deflector.
Dispenser, rinse aid cap, door seal, bracket, and shield.
Main wiring harness for the door assembly.
Components related to water entry and the fill valve system.
Parts for managing overflow and draining, including lever, switch, and drain loop.
The main tub, frame, seals, and mounting brackets.
Legs, levelers, and door spring components.
Thermostat assembly, bracket, shield, and terminal box cover.
Main motor, pump, and related housing components.
Sump, check valve, overflow control switch, and capacitor.
Upper sprayarm, feed tube, nozzle, and related holders.
Spinner, manifold, seal, and mount parts for wash action.
The primary heating element and its associated parts.
Bracket, shield, washer, and nut for heater installation.
The main upper rack for holding dishes.
Components for rack movement and attachment, including tracks, stops, mounts, and clips.
The main lower rack for holding dishes.
Components of the silverware basket, including its door, lid, and clips.
The main lower wash arm and its associated parts.
Seal, sprayarm hub, and cap for the lower wash arm.
Side panel kits, custom panel kits, and cabinet seal kits.
Touch-up paint in various sizes and forms.
Kits for power, stability, and installation of the appliance.