Whirlpool EB21DK - Adjusting Control Settings; Adjusting Door Bins

Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 21.)
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
l Then adjust the Freezer Control if needed.
CONDITION:
REASON:
If Refrigerator
Door opened often
Section is Large amount of food added
TOO WARM
Room temoerature too warm
RECOMMENDED
CONTROL SElTlNGS:
Refrigerator 4
Freezer
B
lf Freezer
Section is
TOO WARM
H Refrigerator
Section is
TOO COLD
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
Refrigerator 3
Freezer
Between
B and C
Refrigerator 2
Freezer
B
lf ICE isn’t
MADE FAST
ENOUGH
lf BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Refrigerator 3
Freezer
Between
B and C
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 4
Freezer
Between
B and C
Adjusting the door bins
To remove door bins:
1. Lii bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.