Whirlpool EB21DKXDB01 - Adjusting Interior Components

Changing the control settings
If you need to adjust temperatures in refrigerator or
freezer, use the settings listed in the chart below as
a guide. If you have any questions, call our Consumer
Assistance Center number, l-800-253-1301, from
anywhere in the U.S.A.
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
l Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator
section too warm
Freezer section
too warm
Refrigerator
section too cold
Ice not made
fast enough
Both sections
too warm
REASON:
l Door opened often
l Large amount of food added
l Room temperature too warm
l Door opened often
l Large amount of food added
l Very cold room temperature
(can’t cycle often enough)
l Controls not set correctly for your conditions
l Heavy ice usage
l Very cold room temperature
(can’t cycle often enough)
l Door opened often
l Large amount of food added
l Very warm or very cold room temperatures
RECOMMENDED SElTINGS:
Refrigerator
Freezer
4
B
3
Between
B and C
2
B
3
Between
B and C
4
Between
B and C
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Dll
Support button
7