Whirlpool ED22MM - Crisper, Meat Pan, and Shelving Adjustments

Adjusting crisper
Adjusting meat pan temperature...
Humidity Control.. .
You can control the amount of humidity in the mois-
ture-sealed crisper,
1. The control can be adjusted to any setting be-
tween LO and HI.
2. LO (open) lets moist I -~~ ~~
air out of crisper for
best storage of fruits
and vegetables
with skins.
3. HI (closed] keeps
moist air in the cris-
per for best storage
of fresh leafy vege-
tables
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator. This helps keep the
meat pan colder than the rest
of the refrigerator.
Set the control to let more or
less cold air through.
/
Use Control to Adjust
Meat Pan Temperatures
‘di
Adjusting shelves.. .
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.
Gloss shelves ore
heovy Be careful
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
To remove door shelves:
l Lift up and out
To replace:
l Insert hooks into guides
on both sides.
8 Push down.
Removing freezer shelves.. . , ,
1. Lift front slightly
2. Lift back off supports.
3 Replace in reverse order
Lltt the Front
Then the Back
Removing freezer bin.. .
For proper arr movement. keep the freezer bin In
place when the refrtgerator IS operatrng
To remove the bln:
l Slide out to the stop.
l Lift the front to clear the stop
l Slide out the rest of the way
To replace the bln:
l Place bin on the sltdes
l Make sure the stops clear
the front of the slrdes
l Slide bin in
6