Whirlpool GEW9868KQ User Manual

Havequestionsaboutyourdryer?
Check your Use and Care Guide for a toll+free number to call, or catl your
dealer. The dealer is listed in the Yellow Pages of your phone directory
under "Appliances -- Household -- Major -- Service and Repair:"
When you call, you will need the dryer model number and serial number:
Both numbers are on the model/serial rating plate located in the door well
behind the dryer door and on front of opening, +_/._
Record the numbers here for handy reference:
ModeB No+
Serial No+
o ?
Moving dryerto a new leeat+en.
Check with a licensed electrician to confirm that supply voltage at new home matches
voltage specified on the model/serial rating plate,
Shut off electrical
supply to dryer.
Unplug power supply
cord and tape it \
securely to dryer. _ _e top
(Or disconnect power \ to cabinet.
supply cable from
dryer,) _e door to
panel
/
Slide dryer onto cardboard or hardboard
before moving it across the floor to
prevent damaging floor covering.
Read and savethese instmetiens.
installer: Leave Installation Instructions with homeowner.
Hemeewner: Keep Installation Instructions for future reference.
Fer best perfermanee, install dryer according to
Installation Instructions+ Failure to complete installation
as instructed could void warranty.
Save Installation Instructions for local electrical inspector's use.

Whirlpool GEW9868KQ Specifications

General

Brand	Whirlpool
Model	GEW9868KQ
Type	Electric Dryer
Capacity	7.0 cu. ft.
Color	White
Number of Cycles	11
Number of Temperature Settings	5
Energy Star Certified	No
Width	27 inches
Control Type	Electronic
Drying Cycles	Normal, Delicates, Heavy Duty, Quick Dry, Timed Dry

Summary

Have questions about your dryer?

Moving dryer to a new location?

Shut off electrical supply to dryer.

Turn off the main electrical supply to the dryer before moving it.

Slide dryer onto cardboard or hardboard.

Protects flooring by placing dryer on protective material during movement.

Turn leveling legs all the way in.

Retract leveling legs to make dryer more stable and easier to move.

Tape door and top to cabinet.

Securely tape the dryer door and top panel to prevent movement during transport.

Installation Instructions

IMPORTANT: Read and save these instructions.

Key instructions for installer and homeowner regarding reading and saving the manual.

Dryer location and dimensions

For proper drying performance

Lists essential environmental and floor requirements for optimal dryer performance.

It is your responsibility to

Outlines customer duties for ensuring proper installation and compliance with codes.

Recessed area/closet installation

Installation clearances

Details minimum clearances required for installing the dryer in recessed areas or closets.

Electrical requirements

Recommended ground method

Provides guidance on ensuring an adequate ground path as per electrical codes.

Exhaust requirements

Mobile home installation requirements

Specifies requirements for installing the dryer in mobile homes, adhering to safety standards.

Plan the exhaust vent installation

Route the vent

Guides on selecting the best path for the dryer's exhaust vent for optimal airflow.

Determine exhaust vent length

Explains how to calculate maximum allowable exhaust vent length based on vent type and elbows.

A. Install vent system (new installation)

B. Prepare dryer

C. Electrical connection

Power supply cord

Connects dryer using a plug and outlet.

Direct wire

Connects dryer directly to home's electrical supply.

Four-wire connection

Three-wire connection

D. Level & exhaust the dryer

Check operation

Verifies dryer functionality after installation, checking for heat and proper operation.

Before you start:

Tools needed

Lists all necessary tools required for the installation process.

Electrical

If using a power supply cord

Summarizes requirements and considerations for connecting the dryer using a power supply cord.

If connecting by direct wire

Summarizes requirements and considerations for connecting the dryer via direct wiring.

Venting

Mobile home installations require

Lists specific components and hardware needed for mobile home venting installations.