Do you have a question about the Whirlpool GOLD SERIES and is the answer not in the manual?
Follow basic precautions to reduce the risk of fire, electric shock, or injury when using your ice maker.
Remove tape and glue from your ice maker before using and clean before first use.
Choose a well-ventilated area, sheltered from elements, with appropriate temperatures for installation.
Ensure proper electrical connection using a grounded 3-prong outlet and dedicated circuit.
Check water supply lines are insulated and pressure is between 30-120 psi.
Turn off water and power supply to the ice maker during extended periods of non-use.
Follow plumbing codes, use copper tubing, and check for leaks during connection.
Install drain pump according to codes, ensure proper tubing and connections to drain.
Connect drain system according to codes, ensuring proper slope and diameter for gravity or pump systems.
Instructions for removing the stainless steel door wrap panel on specific ice maker models.
Steps to reverse the door stop and end-cap for door functionality.
Procedure for reversing the door swing direction on side-swing models.
Instructions for reversing the magnetic door catch on the ice maker door.
Steps to place the door back on the hinges and secure it.
Procedure for replacing the door wrap on specific ice maker models.
Procedure for reversing the door hinges to change the door swing direction.
Instructions for leveling the ice maker using adjustable legs for proper operation.
Procedure for cleaning interior components, including the cutter grid and water pan.
Follow basic precautions to reduce the risk of fire, electric shock, or injury when using your ice maker.
Remove tape and glue from your ice maker before using and clean before first use.
Choose a well-ventilated area, sheltered from elements, with appropriate temperatures for installation.
Ensure proper electrical connection using a grounded 3-prong outlet and dedicated circuit.
Check water supply lines are insulated and pressure is between 30-120 psi.
Turn off water and power supply to the ice maker during extended periods of non-use.
Follow plumbing codes, use copper tubing, and check for leaks during connection.
Install drain pump according to codes, ensure proper tubing and connections to drain.
Connect drain system according to codes, ensuring proper slope and diameter for gravity or pump systems.
Instructions for removing the stainless steel door wrap panel on specific ice maker models.
Steps to reverse the door stop and end-cap for door functionality.
Procedure for reversing the door swing direction on side-swing models.
Instructions for reversing the magnetic door catch on the ice maker door.
Steps to place the door back on the hinges and secure it.
Procedure for replacing the door wrap on specific ice maker models.
Procedure for reversing the door hinges to change the door swing direction.
Instructions for leveling the ice maker using adjustable legs for proper operation.
Procedure for cleaning interior components, including the cutter grid and water pan.
| Counter Depth | Yes |
|---|---|
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Energy Star Certified | Yes |
| Adjustable Shelves | Yes |
| Door Alarm | Yes |
| Temperature Controls | Digital |












Loading...