Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.
NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT: Before you begin, turn the refrigerator control OFR Unplug refrigerator or disconnect power.
TOOLS NEEDED:
Phillips screwdriver, 3_6"Allen wrench, 1/4"hex-head socket wrench, 1/4"and 5/le"open-ended wrenches or adjustable wrench
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
Top Left Hinge
Do Not Remove Screws A
Wiring Connection
A B C D E
A. P-clamp
B. Routing Plate
C. Electrical Housing
D. Wiring Clip
E. Grommets
F. Wiring Plugs
Water Dispenser
Tubing Connection
A
A. Face of Fitting
Door Removal
Base Grille
Top Right Hinge
Do Not Remove Screws A
Bottom Hinge
Leveling
A. Bottom Hinge
B. Leveler Bracket
C. Leveling Foot
Door Alignment
A s__lp' Raise
A.Alignment Screw
To Next Page
Loading...
