OperatingInstructions
Startingyourwasher
Be sure to measure and add detergent, then place a sorted load in the washer before
starting it.
1. Select a load size
• Turn the knob to point at a setting
that describes the size of load you
want to wash.
• The water level can be set for EX
SMALL (a few items), MEDIUM or
LARGE (a full load).
NOTE: Use the LARGE water level
for best permanent press results.
2. Select water temperature
• Match the water temperature to the
type of fabric and soils being washed.
• The top temperature is the wash
selection and the bottom temperature
is the rinse selection.
NOTE: Use warm wash water with
the PERMANENT PRESS or KNITS
GENTLE Cycles.
For heavily soiled permanent press
or knit clothes, pre-wash or pre-soak
before washing in warm water.
ALWAYS use cold rinse water for
permanent press fabrics.
To Next Page
Loading...
