Do you have a question about the Whirlpool LEW0050PQ and is the answer not in the manual?
Brand | Whirlpool |
---|---|
Model | LEW0050PQ |
Type | Electric Dryer |
Color | White |
Voltage | 240 V |
Width | 29 inches |
Control Type | Rotary |
Number of Temperature Settings | 4 |
Wrinkle Guard Option | Yes |
End of Cycle Signal | Yes |
Energy Star Certified | No |
Amperage | 30 A |
Introduction to the Whirlpool Job Aid for the 24" Electric Dryer.
Outlines the purpose and objectives of the service job aid.
Emphasizes safety and explains hazard symbols like DANGER and WARNING.
Details the terms and conditions of the one-year full warranty for the Whirlpool dryer.
Provides instructions and requirements for installing the electric dryer.
Details necessary location requirements, including electrical and space considerations.
Shows the physical dimensions of the dryer.
Details minimum spacing for recessed and closet installations.
Lists additional location requirements specific to mobile home installations.
Outlines user responsibilities regarding electrical connections and code compliance.
Explains how to properly connect the dryer to the electrical supply.
Instructions for connecting the dryer using a power supply cord.
Instructions for connecting the dryer via direct wiring.
Essential instructions for grounding the dryer to prevent electric shock.
Details steps for connecting the power supply cord.
Details steps for connecting via direct wire.
Step-by-step guide for a 4-wire power supply cord connection.
Table showing options for connecting the dryer based on home wiring.
Step-by-step guide for a 4-wire direct connection.
Instructions for a 3-wire power supply cord connection.
Instructions for a 3-wire direct connection.
Critical safety warning about using proper venting materials to prevent fire hazards.
Notice to observe all local codes and ordinances for venting.
Illustrates typical dryer exhaust vent installations.
Shows alternate installation for limited space.
Details special venting provisions for mobile homes.
Guide on determining maximum allowed vent length based on system configuration.
Chart providing maximum vent lengths based on vent type, elbows, and hood style.
Step-by-step instructions for installing the vent system.
Instructions on checking and ensuring the dryer is level.
Explains internal workings of dryer's heater operation and thermostats.
Details how dual heating elements function based on temperature settings.
Describes the function and types of safety thermostats used.
Explains how air circulates through the dryer for heating and cooling.
Describes the reversible motion of the dryer drum.
Explains the operation of the moisture sensor circuit.
Step-by-step guide on how to start dryer operation.
Instructions on how to stop and restart the dryer during a cycle.
How to adjust cycles and temperature settings during operation.
Guidelines for loading clothes into the dryer for optimal performance.
Tips for selecting appropriate cycles and temperatures for drying.
Overview of the different drying cycles available on the dryer.
Recommendations for selecting cycles and temperatures for various fabric types.
Information about the end-of-cycle signal and its purpose.
Explanation of the Anti-Wrinkle feature to prevent garment creasing.
How to use the temperature control button to select drying temperatures.
Identifies and shows locations of internal dryer components.
Instructions on testing pushbutton switches using a VOM or DVM.
Steps for testing the door switch for continuity.
Instructions for testing the resistance of dual heating elements.
How to test thermostats for continuity using an ohmmeter.
Steps for testing motor capacitors using an ohmmeter.
How to test the main motor windings for resistance.
How to test the fan motor windings for resistance.