Whirlpool LFP580GR - Buzzing and Rattling Troubleshooting

7
LFP580GR
Operation of safety device
When the safety device works by abnormal swing of spin drum, machine works automatically to
stop Spin-Dry cycle and operates water supply valve to pour water into the Wash/Spin Tub and
then starts washing cycle for replacing washing clothes evenly.
After above operation has down twice, if safety device works again, machine will stop, and four of
the course lamp (NORMAL、HEAVY DUTY、BLANKET、ECO-SPEEDY) begin blinking on and off at
the same time and the electric buzzer sounds to indicate a problem.
• Open the Wash Lid and rearrange the clothes evenly around the Wash/Spin Tub.
• Close the Wash Lid and press the START/PAUSE button again.
f. Buzzing and rattling
Low
High
TROUBLE INSPECTION CAUSES REMEDY INSPECTION INSPECTION
Start of spin-drying. Normal spin. Safety device work.
Electric circuit
count operation of
safety device.
Electric circuit works to stop
spin when safety device
detects continuously three
times of abnormal swing of
spin drum.
Automatic
adjustment or
load.
Stop of Spin-Dry
Agitation of load (Rinsing
for 2 minutes).
Buzzing/rattling
during water
supply.
INSPECTION
Screw of water valve is
loose.
Something in water valve.
Tighten screws.
Replace.
INSPECTION
Is high water
pressure (more
than 4kg/cm
2
)?
Faucet open too far
Adjust faucet
turning.
Water supply